MFG Day

<strong><a href="https://massmep.org/wp-content/uploads/2022/11/Workshop-1.png"><img class="wp-image-29528 aligncenter" src="https://massmep.org/wp-content/uploads/2022/11/Workshop-1-1024x1024.png" alt="" width="348" height="348" /></a></strong> <strong>Workshop Details:</strong> <ol> <li><strong><u>Workshop</u>: 2-day, in-person workshop exploring the critical elements of Design for Excellence and refining your vision for maximizing your product. (See details below) </strong></li> <li><strong><u>Up to $10,000 of Expert DFX Support</u>: New Program Benefit! Participants will be given the opportunity to qualify for up to $10,000 of DFX support provided by Bayard Design. While up to 10 submissions will be selected for support by Bayard we will make efforts to assist others when possible</strong></li> </ol> This two-day workshop will teach participants about different cost-saving and efficient design processes such as Design for Manufacturability, Design for Assembly, and Value Engineering. Classroom discussions will include analyzing manufacturing processes, along with the benefits and drawbacks of each. <u><b>UP TO $10,000 Of EXPERT DFX SUPPORT- DETAILS:</b></u> Once you have refined your DFX needs we would like to provide further assistance in maximizing your product design. At the end of the workshop participants will be given a "DFX Project Scope Support Request Form” outlining areas in which you desire professional assistance. This form can then be submitted for review by MassMEP, MassRobotics and Bayard Design to determine if your request can be addressed with the <a href="https://www.eda.gov/news/press-release/2021/04/16/us-department-commerce-invests-33-million-cares-act-recovery?q=/news/press-releases/2021/04/16/lowell-ma.htm">EDA MERT 2.0</a> funded support. You will be provided help in completing this request form during the workshop and virtually after the workshop. Once submitted you will receive notification, within 5 days, of potential additional support being offered to you. <strong>In this Workshop:</strong> Participants will learn how Design for Manufacturability (DFM) leads to finding the most cost-effective manufacturing processes that meet the customer's specifications. In addition, participants will learn how the Design for Assembly methodology can be used to develop the most cost-effective and productive way to design products for assembly. This training will also teach participants about Value Engineering and how it minimizes costs while maintaining functionality. <strong>Who Should Attend:</strong> This training is most beneficial to design engineers and other engineering and manufacturing personnel however, all levels of the company would benefit. <strong>Cost Of Workshop:</strong> This two-day workshop totals $99. Please be on the lookout for coupon codes on MassMEP Social (LinkedIn, FaceBook, Twitter, Instagram). <strong>Location:</strong> MassMEP, 27A Midstate Drive Auburn, MA 01501 Suite 200, 508-831-7020   [mep_register url="http://events.constantcontact.com/register/event?llr=7ldh5iebb&oeidk=a07ejigofau992da2bb"]

<strong><a href="https://massmep.org/wp-content/uploads/2022/11/Workshop-1.png"><img class="wp-image-29528 aligncenter" src="https://massmep.org/wp-content/uploads/2022/11/Workshop-1-1024x1024.png" alt="" width="348" height="348" /></a></strong> <strong>Workshop Details:</strong> <ol> <li><strong><u>Workshop</u>: 2-day, in-person workshop exploring the critical elements of Design for Excellence and refining your vision for maximizing your product. (See details below) </strong></li> <li><strong><u>Up to $10,000 of Expert DFX Support</u>: New Program Benefit! Participants will be given the opportunity to qualify for up to $10,000 of DFX support provided by Bayard Design. While up to 10 submissions will be selected for support by Bayard we will make efforts to assist others when possible</strong></li> </ol> This two-day workshop will teach participants about different cost-saving and efficient design processes such as Design for Manufacturability, Design for Assembly, and Value Engineering. Classroom discussions will include analyzing manufacturing processes, along with the benefits and drawbacks of each. <u><b>UP TO $10,000 Of EXPERT DFX SUPPORT- DETAILS:</b></u> Once you have refined your DFX needs we would like to provide further assistance in maximizing your product design. At the end of the workshop participants will be given a "DFX Project Scope Support Request Form” outlining areas in which you desire professional assistance. This form can then be submitted for review by MassMEP, MassRobotics and Bayard Design to determine if your request can be addressed with the <a href="https://www.eda.gov/news/press-release/2021/04/16/us-department-commerce-invests-33-million-cares-act-recovery?q=/news/press-releases/2021/04/16/lowell-ma.htm">EDA MERT 2.0</a> funded support. You will be provided help in completing this request form during the workshop and virtually after the workshop. Once submitted you will receive notification, within 5 days, of potential additional support being offered to you. <strong>In this Workshop:</strong> Participants will learn how Design for Manufacturability (DFM) leads to finding the most cost-effective manufacturing processes that meet the customer's specifications. In addition, participants will learn how the Design for Assembly methodology can be used to develop the most cost-effective and productive way to design products for assembly. This training will also teach participants about Value Engineering and how it minimizes costs while maintaining functionality. <strong>Who Should Attend:</strong> This training is most beneficial to design engineers and other engineering and manufacturing personnel however, all levels of the company would benefit. <strong>Cost Of Workshop:</strong> This two-day workshop totals $99. Please be on the lookout for coupon codes on MassMEP Social (LinkedIn, FaceBook, Twitter, Instagram). <strong>Location:</strong> MassMEP, 27A Midstate Drive Auburn, MA 01501 Suite 200, 508-831-7020   [mep_register url="http://events.constantcontact.com/register/event?llr=7ldh5iebb&oeidk=a07ejigofau992da2bb"]

<a href="https://massmep.org/wp-content/uploads/2022/10/GD_T_R.jpeg"><img class="wp-image-28776 " src="https://massmep.org/wp-content/uploads/2022/10/GD_T_R-1024x684.jpeg" alt="" width="383" height="256" /></a> Even with an understanding of the fundamentals of GD&T, many professionals still lack the confidence to expertly and deliberately apply geometric tolerancing and perform tolerance stack-up analyses to clearly define their product designs. Like with any language, this deeper understanding is built off the fundamentals. <h2>Program Logistics</h2> <ul> <li><b>On-Site Delivery: </b>2 Days (16 Hours)</li> <li><strong>Online Delivery:</strong> 4x 3.5-hour sessions (14 hours synchronous instruction + asynchronous pre-work / homework)</li> <li><strong>Cost:</strong> $1,399</li> <li><strong>CEUs:</strong> 1.4</li> <li><strong>Modes of Teaching and Learning:</strong> Lecture/discussion, Individual work sessions, Group work sessions, Large print review</li> <li><strong>Textbook:</strong> GeoTol Pro 2020, TCI</li> <li><strong>Workbook (additional for virtual):</strong> Advanced GD&T Workbook, WPI</li> <li><strong>Instructor:</strong> Charles A. GIllis, P.E. (<a href="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced#Charlie%20Gillis%20bio">bio</a>)</li> </ul> <h2>Course Description & Outline</h2> The Advanced course helps students apply GD&T to achieve the mating and functional requirements of their parts. This course reinforces fundamentals and provides applications-based exercises where students apply what they have learned. Applications exercises and calculations are performed individually and in teams. The use of functional dimensioning and tolerancing schemes and its effect on assemblies is emphasized throughout the course. Students will expand their understanding of the implications of their specifications on function, manufacturing, inspection, and quality. Students are introduced to tolerance stack-ups and how variation accumulates through an assembly. Students will gain experience and confidence selecting the product definition strategy for an assembly by working more advanced application examples with their peers under the guidance of an expert in a classroom setting. <ul> <li><strong>Basic GD&T Review:</strong> Variation and tolerance, drawing requirements, variation in perspective, 3D & Standards for interpretation. Engineering product definition & downstream processes, Bonus Tolerance, Rule #1, exceptions & overrides. Ambiguity, types of variation & tolerances, Unrelated & related AMEs. Unrelated & related MMEs. Datums and degrees of freedom. Establishing datum reference frames including datum feature precedence and datum modifiers. Additional datum applications including secondary datum feature at MMB, tertiary datum feature at MMB, calculating allowable datum feature shift, and applications for datum feature modifiers.</li> <li><strong>Advanced Datum Reference Frame Concepts:</strong> Moveable datum targets, Two holes as datum feature, Hole and slot as datum feature, coaxial holes as a datum feature, rotational control, simultaneous requirements, customized datum reference frame. Applications and establishment of the correct functional datum reference frame.</li> <li><strong>Tolerance Stack-Ups: </strong>Geometric controls in tolerance analysis, the tolerance stack-up chain, preliminary tolerance assignment, analysis and assignment methods.</li> <li><strong>Profile Control Concepts:</strong> Review of profile including composite profile. Advanced concepts such as free state variation, non-rigid parts; non-uniform profile, dynamic profile. Profile verification applications & gage design. Accumulation of variation across profile tolerances.</li> <li><strong>Position Control Concepts: </strong>Review of composite tolerancing and dual segment position tolerancing, Advanced concepts such as cylindrical tolerance zone, rectangular tolerance zone, spherical tolerance zone, conical tolerance zone, position boundary. Position verification application exercises & gage design. Determining the correct position tolerance.</li> <li><strong>Boundaries: </strong>Boundaries and their applications in design and tolerance analysis. Determining Inner & outer boundaries for features with and without modifiers using various datum reference frames. Comparison among circular runout, total runout, position, and profile for coaxial control. Applications of various coaxial tolerances. Accumulation of variation between coaxial features.</li> </ul> <h2>Learning Outcomes</h2> <ul> <li>Construct the appropriate functional datum reference frames for parts after analyzing the mating requirements.</li> <li>Apply datum feature modifiers where appropriate based on analyzing the requirements.</li> <li>Specify datum reference frames properly to represent the part's functional requirements, including the use and interpretation of datum shift where appropriate.</li> <li>Apply geometric tolerancing to control features and ensure mating requirements are met.</li> <li>Combine the effects of different types of variation using the concept of boundaries, calculate boundary sizes and use boundaries properly in stack-up analysis.</li> <li>Specify tolerances to ensure multiple mating part relationships between constrained features.</li> <li>Perform tolerance stack-up analysis to assign critical tolerances.</li> <li>Apply geometric controls and symbols properly to suit the functional requirements.</li> <li>Calculate linear, axial and orientation stack-ups using parts toleranced with either numeric or geometric tolerancing</li> </ul> <h2>Who Should Attend</h2> Design, manufacturing, and quality engineers and engineering technicians will find this workshop beneficial. Anyone involved with drawing review and anyone looking for a deeper understanding of how to apply geometric tolerancing and perform tolerance analysis will benefit from this course. <h2>Prerequisites & Preparations</h2> At least one Basic GD&T workshop/course is required as a prerequisite. It's essential that individuals understand the underlying principles that the Basic course is focused on teaching. In addition, students should have at least 1 year of on-the-job experience applying GD&T in the development of mechanical specifications. <hr /> <table border="0" cellspacing="2" cellpadding="2"> <thead> <tr> <th scope="col"><strong><a id="Charlie Gillis bio" name="Charlie%20Gillis%20bio"></a>About the Workshop Instructor, Charles A. Gillis, P.E. </strong></th> </tr> </thead> <tbody> <tr> <td>Charlie Gillis has over 25 years of machine design experience in industry. Through<strong><img class="" src="https://go2.wpi.edu/l/170792/2021-02-03/2kvvbn/170792/16123870444ao13d9M/Charles_Gillis_header_photo.jpg" alt="" width="223" height="297" align="right" border="0" /></strong> his work with Dynamic Design Consulting, LLC, he helps clients with product design, design for assemblability and manufacturability, design documentation, tolerance stack-up analysis, and related capability-building. He has invented and designed mechanical and electro-mechanical devices of great diversity, from high-speed, fully-automated precision mechanisms and manufacturing machinery to kinetic sculptures installed as public art. He previously served as a mechanical design engineer for The Gillette Company, designing automated machinery for manufacturing blade and razor products. He has designed equipment to manufacture the Mach3, Venus, Sensor3, Fusion, and Embrace product lines. He has been training practicing engineers in GD&T, Print Reading, and related mechanical design and documentation topics for over 10 years. In addition to authoring Hammer’s Blueprint Reading Basics (Industrial Press, 2017), he is also a contributing author to Machinery’s Handbook (Industrial Press, 2020), Machine Designers Reference (Industrial Press, 2011) and The Cam Design and Manufacturing Handbook (Industrial Press, 2002). Charlie earned his Bachelor of Science Degree in Mechanical Engineering from Worcester Polytechnic Institute, and his Master of Science Degree in Mechanical Engineering from Northeastern University. He is a licensed Professional Engineer in the Commonwealth of Massachusetts, and holder of a Geometric Dimensioning and Tolerancing Professional Certificate-Senior Level (GDTP-S) from the American Society of Mechanical Engineering (ASME).</td> </tr> </tbody> </table> [mep_register url="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced"]

<h1 style="text-align: center">May 19, 2023</h1> <h1 style="text-align: center">2nd Annual Manufacturing Your Future Smart Manufacturing</h1> <p style="text-align: center"><img class="alignnone wp-image-30460 size-medium" src="https://massmep.org/wp-content/uploads/2022/11/MfrYourFuture300sqF-300x300.png" alt="" width="300" height="300" /></p> <p style="text-align: center"><em>Industry 4.0 "is a journey of continued improvement & innovation through advanced technologies, process enhancements and integrated information that provides manufacturing companies a competitive advantage.” -Tom Andrellos, Former MassMEP Director of Growth & Innovation</em></p> This event is for Massachusetts Manufacturers to come together and take a deep dive through the components of Industry 4.0, a view of SMART Manufacturing, and key takeaways on the importance of building a roadmap in Smart Manufacturing to remain competitive and see direct impacts to the bottom line. Subject Matter Experts will be speaking to Smart Manufacturing Roadmapping, IIoT, Automation, Additive, CyberSecurity, and so much more. Expect to see these subject matter experts speaking and exhibiting along with other experts in this field at the event. You can find more details on the event website <a href="https://massmep.org/manufacturing-i40/">here</a>! [mep_register url="http://events.constantcontact.com/register/event?llr=7ldh5iebb&oeidk=a07ejgmlt78c80f1144"]

<a href="https://massmep.org/wp-content/uploads/2022/10/GD_T_R.jpeg"><img class="wp-image-28776 " src="https://massmep.org/wp-content/uploads/2022/10/GD_T_R-1024x684.jpeg" alt="" width="383" height="256" /></a> Even with an understanding of the fundamentals of GD&T, many professionals still lack the confidence to expertly and deliberately apply geometric tolerancing and perform tolerance stack-up analyses to clearly define their product designs. Like with any language, this deeper understanding is built off the fundamentals. <h2>Program Logistics</h2> <ul> <li><b>On-Site Delivery: </b>2 Days (16 Hours)</li> <li><strong>Online Delivery:</strong> 4x 3.5-hour sessions (14 hours synchronous instruction + asynchronous pre-work / homework)</li> <li><strong>Cost:</strong> $1,399</li> <li><strong>CEUs:</strong> 1.4</li> <li><strong>Modes of Teaching and Learning:</strong> Lecture/discussion, Individual work sessions, Group work sessions, Large print review</li> <li><strong>Textbook:</strong> GeoTol Pro 2020, TCI</li> <li><strong>Workbook (additional for virtual):</strong> Advanced GD&T Workbook, WPI</li> <li><strong>Instructor:</strong> Charles A. GIllis, P.E. (<a href="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced#Charlie%20Gillis%20bio">bio</a>)</li> </ul> <h2>Course Description & Outline</h2> The Advanced course helps students apply GD&T to achieve the mating and functional requirements of their parts. This course reinforces fundamentals and provides applications-based exercises where students apply what they have learned. Applications exercises and calculations are performed individually and in teams. The use of functional dimensioning and tolerancing schemes and its effect on assemblies is emphasized throughout the course. Students will expand their understanding of the implications of their specifications on function, manufacturing, inspection, and quality. Students are introduced to tolerance stack-ups and how variation accumulates through an assembly. Students will gain experience and confidence selecting the product definition strategy for an assembly by working more advanced application examples with their peers under the guidance of an expert in a classroom setting. <ul> <li><strong>Basic GD&T Review:</strong> Variation and tolerance, drawing requirements, variation in perspective, 3D & Standards for interpretation. Engineering product definition & downstream processes, Bonus Tolerance, Rule #1, exceptions & overrides. Ambiguity, types of variation & tolerances, Unrelated & related AMEs. Unrelated & related MMEs. Datums and degrees of freedom. Establishing datum reference frames including datum feature precedence and datum modifiers. Additional datum applications including secondary datum feature at MMB, tertiary datum feature at MMB, calculating allowable datum feature shift, and applications for datum feature modifiers.</li> <li><strong>Advanced Datum Reference Frame Concepts:</strong> Moveable datum targets, Two holes as datum feature, Hole and slot as datum feature, coaxial holes as a datum feature, rotational control, simultaneous requirements, customized datum reference frame. Applications and establishment of the correct functional datum reference frame.</li> <li><strong>Tolerance Stack-Ups: </strong>Geometric controls in tolerance analysis, the tolerance stack-up chain, preliminary tolerance assignment, analysis and assignment methods.</li> <li><strong>Profile Control Concepts:</strong> Review of profile including composite profile. Advanced concepts such as free state variation, non-rigid parts; non-uniform profile, dynamic profile. Profile verification applications & gage design. Accumulation of variation across profile tolerances.</li> <li><strong>Position Control Concepts: </strong>Review of composite tolerancing and dual segment position tolerancing, Advanced concepts such as cylindrical tolerance zone, rectangular tolerance zone, spherical tolerance zone, conical tolerance zone, position boundary. Position verification application exercises & gage design. Determining the correct position tolerance.</li> <li><strong>Boundaries: </strong>Boundaries and their applications in design and tolerance analysis. Determining Inner & outer boundaries for features with and without modifiers using various datum reference frames. Comparison among circular runout, total runout, position, and profile for coaxial control. Applications of various coaxial tolerances. Accumulation of variation between coaxial features.</li> </ul> <h2>Learning Outcomes</h2> <ul> <li>Construct the appropriate functional datum reference frames for parts after analyzing the mating requirements.</li> <li>Apply datum feature modifiers where appropriate based on analyzing the requirements.</li> <li>Specify datum reference frames properly to represent the part's functional requirements, including the use and interpretation of datum shift where appropriate.</li> <li>Apply geometric tolerancing to control features and ensure mating requirements are met.</li> <li>Combine the effects of different types of variation using the concept of boundaries, calculate boundary sizes and use boundaries properly in stack-up analysis.</li> <li>Specify tolerances to ensure multiple mating part relationships between constrained features.</li> <li>Perform tolerance stack-up analysis to assign critical tolerances.</li> <li>Apply geometric controls and symbols properly to suit the functional requirements.</li> <li>Calculate linear, axial and orientation stack-ups using parts toleranced with either numeric or geometric tolerancing</li> </ul> <h2>Who Should Attend</h2> Design, manufacturing, and quality engineers and engineering technicians will find this workshop beneficial. Anyone involved with drawing review and anyone looking for a deeper understanding of how to apply geometric tolerancing and perform tolerance analysis will benefit from this course. <h2>Prerequisites & Preparations</h2> At least one Basic GD&T workshop/course is required as a prerequisite. It's essential that individuals understand the underlying principles that the Basic course is focused on teaching. In addition, students should have at least 1 year of on-the-job experience applying GD&T in the development of mechanical specifications. <hr /> <table border="0" cellspacing="2" cellpadding="2"> <thead> <tr> <th scope="col"><strong><a id="Charlie Gillis bio" name="Charlie%20Gillis%20bio"></a>About the Workshop Instructor, Charles A. Gillis, P.E. </strong></th> </tr> </thead> <tbody> <tr> <td>Charlie Gillis has over 25 years of machine design experience in industry. Through<strong><img class="" src="https://go2.wpi.edu/l/170792/2021-02-03/2kvvbn/170792/16123870444ao13d9M/Charles_Gillis_header_photo.jpg" alt="" width="223" height="297" align="right" border="0" /></strong> his work with Dynamic Design Consulting, LLC, he helps clients with product design, design for assemblability and manufacturability, design documentation, tolerance stack-up analysis, and related capability-building. He has invented and designed mechanical and electro-mechanical devices of great diversity, from high-speed, fully-automated precision mechanisms and manufacturing machinery to kinetic sculptures installed as public art. He previously served as a mechanical design engineer for The Gillette Company, designing automated machinery for manufacturing blade and razor products. He has designed equipment to manufacture the Mach3, Venus, Sensor3, Fusion, and Embrace product lines. He has been training practicing engineers in GD&T, Print Reading, and related mechanical design and documentation topics for over 10 years. In addition to authoring Hammer’s Blueprint Reading Basics (Industrial Press, 2017), he is also a contributing author to Machinery’s Handbook (Industrial Press, 2020), Machine Designers Reference (Industrial Press, 2011) and The Cam Design and Manufacturing Handbook (Industrial Press, 2002). Charlie earned his Bachelor of Science Degree in Mechanical Engineering from Worcester Polytechnic Institute, and his Master of Science Degree in Mechanical Engineering from Northeastern University. He is a licensed Professional Engineer in the Commonwealth of Massachusetts, and holder of a Geometric Dimensioning and Tolerancing Professional Certificate-Senior Level (GDTP-S) from the American Society of Mechanical Engineering (ASME).</td> </tr> </tbody> </table> [mep_register url="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced"]

<a href="https://massmep.org/wp-content/uploads/2022/10/GD_T_R.jpeg"><img class="wp-image-28776 " src="https://massmep.org/wp-content/uploads/2022/10/GD_T_R-1024x684.jpeg" alt="" width="383" height="256" /></a> Even with an understanding of the fundamentals of GD&T, many professionals still lack the confidence to expertly and deliberately apply geometric tolerancing and perform tolerance stack-up analyses to clearly define their product designs. Like with any language, this deeper understanding is built off the fundamentals. <h2>Program Logistics</h2> <ul> <li><b>On-Site Delivery: </b>2 Days (16 Hours)</li> <li><strong>Online Delivery:</strong> 4x 3.5-hour sessions (14 hours synchronous instruction + asynchronous pre-work / homework)</li> <li><strong>Cost:</strong> $1,399</li> <li><strong>CEUs:</strong> 1.4</li> <li><strong>Modes of Teaching and Learning:</strong> Lecture/discussion, Individual work sessions, Group work sessions, Large print review</li> <li><strong>Textbook:</strong> GeoTol Pro 2020, TCI</li> <li><strong>Workbook (additional for virtual):</strong> Advanced GD&T Workbook, WPI</li> <li><strong>Instructor:</strong> Charles A. GIllis, P.E. (<a href="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced#Charlie%20Gillis%20bio">bio</a>)</li> </ul> <h2>Course Description & Outline</h2> The Advanced course helps students apply GD&T to achieve the mating and functional requirements of their parts. This course reinforces fundamentals and provides applications-based exercises where students apply what they have learned. Applications exercises and calculations are performed individually and in teams. The use of functional dimensioning and tolerancing schemes and its effect on assemblies is emphasized throughout the course. Students will expand their understanding of the implications of their specifications on function, manufacturing, inspection, and quality. Students are introduced to tolerance stack-ups and how variation accumulates through an assembly. Students will gain experience and confidence selecting the product definition strategy for an assembly by working more advanced application examples with their peers under the guidance of an expert in a classroom setting. <ul> <li><strong>Basic GD&T Review:</strong> Variation and tolerance, drawing requirements, variation in perspective, 3D & Standards for interpretation. Engineering product definition & downstream processes, Bonus Tolerance, Rule #1, exceptions & overrides. Ambiguity, types of variation & tolerances, Unrelated & related AMEs. Unrelated & related MMEs. Datums and degrees of freedom. Establishing datum reference frames including datum feature precedence and datum modifiers. Additional datum applications including secondary datum feature at MMB, tertiary datum feature at MMB, calculating allowable datum feature shift, and applications for datum feature modifiers.</li> <li><strong>Advanced Datum Reference Frame Concepts:</strong> Moveable datum targets, Two holes as datum feature, Hole and slot as datum feature, coaxial holes as a datum feature, rotational control, simultaneous requirements, customized datum reference frame. Applications and establishment of the correct functional datum reference frame.</li> <li><strong>Tolerance Stack-Ups: </strong>Geometric controls in tolerance analysis, the tolerance stack-up chain, preliminary tolerance assignment, analysis and assignment methods.</li> <li><strong>Profile Control Concepts:</strong> Review of profile including composite profile. Advanced concepts such as free state variation, non-rigid parts; non-uniform profile, dynamic profile. Profile verification applications & gage design. Accumulation of variation across profile tolerances.</li> <li><strong>Position Control Concepts: </strong>Review of composite tolerancing and dual segment position tolerancing, Advanced concepts such as cylindrical tolerance zone, rectangular tolerance zone, spherical tolerance zone, conical tolerance zone, position boundary. Position verification application exercises & gage design. Determining the correct position tolerance.</li> <li><strong>Boundaries: </strong>Boundaries and their applications in design and tolerance analysis. Determining Inner & outer boundaries for features with and without modifiers using various datum reference frames. Comparison among circular runout, total runout, position, and profile for coaxial control. Applications of various coaxial tolerances. Accumulation of variation between coaxial features.</li> </ul> <h2>Learning Outcomes</h2> <ul> <li>Construct the appropriate functional datum reference frames for parts after analyzing the mating requirements.</li> <li>Apply datum feature modifiers where appropriate based on analyzing the requirements.</li> <li>Specify datum reference frames properly to represent the part's functional requirements, including the use and interpretation of datum shift where appropriate.</li> <li>Apply geometric tolerancing to control features and ensure mating requirements are met.</li> <li>Combine the effects of different types of variation using the concept of boundaries, calculate boundary sizes and use boundaries properly in stack-up analysis.</li> <li>Specify tolerances to ensure multiple mating part relationships between constrained features.</li> <li>Perform tolerance stack-up analysis to assign critical tolerances.</li> <li>Apply geometric controls and symbols properly to suit the functional requirements.</li> <li>Calculate linear, axial and orientation stack-ups using parts toleranced with either numeric or geometric tolerancing</li> </ul> <h2>Who Should Attend</h2> Design, manufacturing, and quality engineers and engineering technicians will find this workshop beneficial. Anyone involved with drawing review and anyone looking for a deeper understanding of how to apply geometric tolerancing and perform tolerance analysis will benefit from this course. <h2>Prerequisites & Preparations</h2> At least one Basic GD&T workshop/course is required as a prerequisite. It's essential that individuals understand the underlying principles that the Basic course is focused on teaching. In addition, students should have at least 1 year of on-the-job experience applying GD&T in the development of mechanical specifications. <hr /> <table border="0" cellspacing="2" cellpadding="2"> <thead> <tr> <th scope="col"><strong><a id="Charlie Gillis bio" name="Charlie%20Gillis%20bio"></a>About the Workshop Instructor, Charles A. Gillis, P.E. </strong></th> </tr> </thead> <tbody> <tr> <td>Charlie Gillis has over 25 years of machine design experience in industry. Through<strong><img class="" src="https://go2.wpi.edu/l/170792/2021-02-03/2kvvbn/170792/16123870444ao13d9M/Charles_Gillis_header_photo.jpg" alt="" width="223" height="297" align="right" border="0" /></strong> his work with Dynamic Design Consulting, LLC, he helps clients with product design, design for assemblability and manufacturability, design documentation, tolerance stack-up analysis, and related capability-building. He has invented and designed mechanical and electro-mechanical devices of great diversity, from high-speed, fully-automated precision mechanisms and manufacturing machinery to kinetic sculptures installed as public art. He previously served as a mechanical design engineer for The Gillette Company, designing automated machinery for manufacturing blade and razor products. He has designed equipment to manufacture the Mach3, Venus, Sensor3, Fusion, and Embrace product lines. He has been training practicing engineers in GD&T, Print Reading, and related mechanical design and documentation topics for over 10 years. In addition to authoring Hammer’s Blueprint Reading Basics (Industrial Press, 2017), he is also a contributing author to Machinery’s Handbook (Industrial Press, 2020), Machine Designers Reference (Industrial Press, 2011) and The Cam Design and Manufacturing Handbook (Industrial Press, 2002). Charlie earned his Bachelor of Science Degree in Mechanical Engineering from Worcester Polytechnic Institute, and his Master of Science Degree in Mechanical Engineering from Northeastern University. He is a licensed Professional Engineer in the Commonwealth of Massachusetts, and holder of a Geometric Dimensioning and Tolerancing Professional Certificate-Senior Level (GDTP-S) from the American Society of Mechanical Engineering (ASME).</td> </tr> </tbody> </table> [mep_register url="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing-advanced"]

<a href="https://massmep.org/wp-content/uploads/2022/10/GD_T_R.jpeg"><img class="aligncenter wp-image-28776" src="https://massmep.org/wp-content/uploads/2022/10/GD_T_R-1024x684.jpeg" alt="" width="431" height="287" /></a>   Geometric Dimensioning and Tolerancing is the universally accepted method of communicating dimensioning requirements on engineering drawings. This workshop will help you understand and use this universal engineering language to communicate the types and amounts of the inevitable variation that parts are allowed to have, per the drawing. <h2>Course Description & Outline</h2> Intended for practicing professionals who create drawing specifications or read drawings, this course helps students make sense of a topic that some find overwhelming. In a safe learning environment, the key principles are explained and brought down to the real world. More than simply memorizing symbols, students leave this course with a working understanding of how the system works and feel confident fully understanding drawing requirements and creating their own tolerancing schemes for parts. This course provides lots of practical hands on exercises to drive home the concepts and encourage questions and effective discussions. The exercises go beyond the theory to show how tolerancing works on real working parts. <ul> <li><strong>Fundamentals of GD&T: </strong>Types of variation and how they’re controlled. Features of size and surfaces. Rule #1. Definitions of maximum material condition (MMC) and least material condition (LMC) and how they are used to determine bonus tolerance.</li> <li><strong>Tolerances of Form:</strong> Controls of flatness, straightness, circularity and cylindricity. Examples on how they are specified, their meaning and principles of verification. Straightness and flatness controls applied to features of size and surfaces.</li> <li><strong>Concept of Datums and the Datum Reference Frame: </strong>The common point of reference for the part definition from design through manufacturing and inspection. How imperfect parts are measured according to the design intent.</li> <li><strong>Tolerances of Orientation:</strong> Controls of parallelism, perpendicularity, and angularity applied to surfaces and features of size. Examples on their use and meaning as well as verification principles.</li> <li><strong>Tolerances of Location: </strong>Controls of position, comparison and conversion from conventional tolerancing. Applications and examples of position used for various features. Composite position tolerances. The classic examples of floating and fixed fasteners will be cited to demonstrate tolerancing for position to avoid interference problems of fit. Projected tolerance zone. Concentricity and symmetry interpretation and application.</li> <li><strong>Tolerances of Profile: </strong>Controls of profile of a line and profile of a surface. Equally disposed and unequally disposed profile tolerances. Profile tolerances applied to multiple surfaces. Examples of various simple and complex surfaces.</li> <li><strong>Tolerances of Runout: </strong>Controls of circular runout and total runout.</li> </ul> <h2>Learning Outcomes</h2> <ul> <li>Name the four types of variation that exist on parts, recognize the limitations of numeric tolerances and understand the need for geometric tolerances.</li> <li>Analyze tolerances expressed numerically and calculate minimum and maximum allowable values for dimensions.</li> <li>Understand and apply the symbols used with the geometric system of tolerances.</li> <li>Recognize basic dimensions on prints and understand their meaning.</li> <li>Identify and properly read feature control frames.</li> <li>Recognize when bonus tolerance is available and calculate geometric tolerance values when bonus tolerance applies.</li> <li>Create specifications using bonus tolerance where applicable</li> <li>Recognize datum feature identifiers applied to features with size and surfaces.</li> <li>Identify the datum reference frame including order of precedence.</li> <li>Recognize when datum shift is used and calculate the amount of shift.</li> <li>Identify and interpret geometric controls on location, orientation, form, profile & runout.</li> <li>Construct illustrations of tolerance zones defined by geometric controls, including 3D and 2D tolerance zones,and those allowed to move.</li> <li>Properly evaluate inspection data in light of tolerance zones defined by geometric controls.</li> </ul> <h2>Who Should Attend</h2> CAD draftspersons, tool designers, technical inspectors, mechanical engineering, technicians, machine shop and tool room supervisors. Design, manufacturing, and project engineers, quality control personnel, engineering managers and supervisors will also find this workshop beneficial.   For More Information on the Certificate <a href="https://go2.wpi.edu/wpi-geometric-dimensioning-tolerancing-certificate">Click Here</a> [mep_register url="https://go2.wpi.edu/geometric-dimensioning-and-tolerancing"]

<p style="text-align: center"><img class="alignnone wp-image-29096 size-medium" src="https://massmep.org/wp-content/uploads/2022/11/11.16.22-1-300x300.png" alt="" width="300" height="300" /></p> As Manufacturers get ready to move into 2023 they are reevaluating their basic approach to Marketing and Sales. Manufacturers are seeing how critical marketing and sales is to sustain and grow business. MassMEP, Tribal Vision and Top Line Systems through Aslan training and development are putting together a Marketing & Sales Consortium information session. We will discuss the who, what, where and why this opportunity is for MA Manufacturers, the value add from being a part of this consortium and how there is no cash flow obligation for you. [mep_register url="https://massmep-org.zoom.us/webinar/register/WN_ud9Kko7uREugzmS8l1TeDQ"]